SolarEdge SE5000H User Manual

The communication board has a standard RJ45 terminal block for Ethernet connection,
a 6-pin terminal block for RS485 connection, and an 8-pin connector for power control
devices.
The SolarEdge ZigBee or Wi-Fi Plug-in and the GSMPlug-in can be connected to the
communication board for optional wireless connection.
Figure 18: Communication board connectors
EV Charging Single Phase Inverter Guide MAN-01-00583-1.5
52 Communication Connectors

SolarEdge SE5000H Specifications

General

Model	SE5000H
Manufacturer	SolarEdge
Topology	Transformerless
AC Nominal Power	5000 W
Rated AC Power	5000 W
Cooling	Natural Convection
Noise Level	< 25 dBA
Protection Rating	IP65
Max. Input DC Voltage	480 Vdc
Number of MPP Trackers	1
AC Voltage	240 V
Weight	10.6 kg
Operating Temperature Range	-25°C to 60°C