Enabling ipMIDI on your Duality:
In the SSL > MISC > SETUP menu, toggle the ʻMIDI connects via: ’ setting to ‘Network’. Your console will now
communicate with your workstation via Ethernet. With ‘MIDI connects via:’ set to ʻMIDI ports’, Duality will
c
ommunicate with your workstation via the conventional MIDI connectors on the rear of your console.
Also in the SSL/MISC/SETUP menu, ensure that the ‘DAW’ option (workstation layer 1) and DAW2 (workstation layer
2) are set to match your workstation or workstations if you are using the second layer. Please note that you will need to
r
estart the console after making a change to the DAW layer options.
The console will need to be rebooted after changing either of these settings.
Finding the console on the Duality Remote application:
Launch Duality Remote on your workstation. Normally Duality Remote will automatically locate the console and the
message ‘Duality Connected’ will be shown in green text in the bottom left hand corner of the browser:
If the list is empty, click on ‘Find Duality’, select the console you wish to connect to and click the check box. The first time
you connect (or if you wish to connect to a different console) kick on the ‘Find’ icon. .
If your console does not appear in the list, it suggests you have a network related issue. Please follow the steps in the
network trouble shooting section at the end of this document to resolve the issue.
Page 28
Duality SE Installation Guide
System Installation Section 4
To Next Page
Loading...
Need help?
General
