Solid State Logic Duality SE Installation Guide

Logic’s Click and ports environment layer selects the SUM of all of the ipMIDI unput ports as its default MCU control data
s
ource. This may lead to difficulties when using multiple DAW layers. To avoid Logic responding to MIDI messages intended
for the other DAW layer, the Click and Port MIDI port mapping should be changed from SUM to individual direct MIDI port
assignment. The example below shows Logic on DAW layer 1:
Preferences/Control Surfaces Setup menu:
If you have automation, set the MMC midi port in File/Project Settings/Synchronisation/MIDI to ipMIDI port 14 (or physical
MIDI port 7 if you are using the console MIDI ports):
For other DAWs, please refer to the program’s manual for details about configuring MIDI controllers.
Page 32
Duality SE Installation Guide
System Installation Section 4
ipMIDI,Port 14

Solid State Logic Duality SE Specifications

General

Brand	Solid State Logic
Model	Duality SE
Category	Music Mixer
Language	English