7. Indicates whether the audio function is “On” or “OFF”.
8. Indicates to the user that the current result is an average and not an individual test.
9. Indicates to the user that the Alarm Reminder is “ON”.
10. Month (Note: the year is only displayed in the “setting” mode.)
11. Day
12. Hour
13. Minute
The LCD screen for “Power Off”: When the meter is in the OFF position, the date, time,
measurement unit, battery icon, and the letters “OFF” will still remain on the screen (see
Figure 1-10). If the voice is on or the alarm reminder is on, the speaker icon and the alarm
icon will be displayed as well.
1-10
If the meter contains no test strip and the meter is set to the “OFF” position, you can press
the “R” right function button and the meter will audibly speak the current date and time (for
example: Two Thousand Eleven, February Twenty-first, Four Forty pm)
Setting the Meter
*Note: The Solus V2 is able to have the date and time updated by automatically from your
computer. To learn how, visit www.BioSenseMD.com.
To SET the meter:
1. With the meter in the “OFF” position, press the “M” left function button and hold down
until you hear “You are now in setting mode.” and/or a flashing “12” appears on the screen.
This represents the last two digits of the current year. The meter is now in the “Setting”
mode. You will hear: “You are now in setting mode. The year is 2011. Please set the year”
(see Figure 1-11).
2. Set the Year - Press the “Up” or “Down” button on the right side of the meter until the last
two digits of the desired year are displayed. Each time you adjust the year, you will hear “The
year is XXX.” Press the “R” right function button to confirm the correct year and the meter
will move to the next setting. You will hear “The month is XXX. Please set the month” (see
To Next Page
Loading...