Note: Make sure that you always follow your doctor’s or healthcare professional’s
instructions.
If your strips have expired, contact your supplier for a new bottle of strips.
If your control test results are outside of the range listed on the test strip bottle, contact the
BioSense Medical Devices and speak to one of our customer support representatives at toll
free (877) 592-3922 for assistance.
Comparing Your Meter Results to Your Lab Result
In order to compare your meter results to a lab result, you must be fasting. You will also need
to test your blood sugar with your meter within five (5) minutes of having your blood drawn
by a healthcare professional. Keep in mind that the lab uses different technology than your
meter and that blood glucose meters for self-testing may read within +
20 percent of the lab
result, according to FDA guidelines.
Chapter 4: Recalling the Memory and Downloading Results
Recalling the Memory
Your test results will be stored automatically. Your meter can store up to 500 test results at
any single point in time. You can also view your averages over the last 7, 14, 28, 60, and 90
days.
To recall the memory:
1. In the “OFF” position, press the “M” left function button once and you will hear:
“Recalling the memory.” If no results are stored, “---” will be displayed on the screen and
you will hear: “Zero memory” (see Figure 4-1 and 4-2).
2. Press the “Down” key to retrieve the latest test first.
3. Press the “Up” key to retrieve the oldest test first.
To Next Page
Loading...