Sonim XP1520 BOLT SL User Manual

31
Managing Calls
• Send Alert: Sends IPA to selected entry.
Call Timers
• To view the total time spent on the last call, select
Menu > Calls > Call history > Options > Advanced
> Call timers > Last call.
• To view the total time spent on outgoing calls, select
Menu > Calls > Call history > Options > Advanced
> Call timers > Dialled calls.
• To view the total time spent on incoming calls, select
Menu > Calls > Call history > Options > Advanced
> Call timers > Received calls.
• To reset the time of all calls, select Menu > Calls >
Call history > Options > Advanced > Call timers >
Reset all.
Call Settings
Auto Answer
Auto answer is enabled only if wired headset or Bluetooth
headset/carkit is connected to the phone. When auto
answer is activated, your incoming calls will automatically
be answered. Select Menu > Calls > Call settings >
Earphone auto answer > On.
Any key Answer
When enabled, you can press any key except to
answer a call.
To activate this feature, select Menu > Calls > Call
settings > Any key answer > On.
Long pressing (press and hold) the Power on/
off key during a call will only end the call
and not switch off the phone.
Call Waiting
When call waiting is enabled and the phone is in
conversation, the incoming number is displayed when
you receive a call.
1. To enable this feature, select Menu > Calls > Call
settings > Call waiting > Activate.
2. To cancel this feature, select Menu > Calls > Call
settings > Call waiting > Deactivate. You will not
be prompted when you receive an incoming call
while your phone is busy. The caller will receive a
busy signal.
3. To verify the call waiting status, select Menu > Calls
> Call settings > Call waiting > Query Status.
Caller ID
When you make a call, you can select whether or not to
display your id to the receiver.
• Select Menu > calls > Call settings > Caller ID >
Set by network, to allow the network operator to
define the Caller ID settings.
• Select Menu > Calls > Call settings > Caller ID >
Hide ID, to hide your id from the receiver.
• Select Menu > Calls > Call settings > Caller ID >
Send ID, to display the ID to the receiver.

Sonim XP1520 BOLT SL Specifications

Ruggedization

IP certification	IP-68
Submersible depth	2 metres
Submersible duration	30 min
Drop resistance height	6.5 ft
Vibration protection range	5Hz to 200Hz
Shock resistance	4G
Operational temperature range	-5˚F to +130˚F
Impact resistance on housing	4J
Impact resistance on screen	1J
Screen thickness	1.8 mm

Battery

Battery capacity	1950 mAh
Talk time	12 hours
Standby time	875 hours

Display

Display size	2 inch
Display resolution	QVGA 240x320
Display area	30x40mm

Weight and Dimensions

Size	126mm x 60mm x 25mm
Weight	185 grams