S6 Portable Digital Color Doppler Ultrasound System
Service Manual
Appendix A
Make a Bootable USB Key
A.1 Make bootable key directly through PC
A. Turn on the PC, enter BIOS setup; set the first boot device to optical drive.
Insert the SonoScape upgrade CD. Save BIOS setting and turn off the system.
B. It’s strongly recommended to disconnect any removable disk drives (thumb
drive and external hard drive) right now.
C. Insert a USB drive which is to be made bootable. Note that this USB drive will
be FORMATED, any original data inside will be destroyed!
D. Start up the PC, boot up with the CD. Follow the on screen instruction to make
a bootable USB key.
Figure A.1: Making bootable USB key
E. Turn off the system when the writing process completes. The USB drive is now
bootable and with kernel written in.
P/N: 4720-0034-01A
A-1
To Next Page
Loading...
Need help?
General
