GM47/GM48 INTEGRATOR’S MANUAL
112
LZT 123 7263 R1A
Test command returns values supported by the ME as a compound
value, refer GSM 07.07.
<pas> Description
0 Ready (ME allows commands from TA/TE)
1 Unavailable (ME does not allow commands from TA/TE).
Not Supported
2 Unknown (ME is not guaranteed to respond to
instructions). Not Supported
3 Ringing (ME is ready for commands from TA/TE, but the
ringer is active)
4 Callinprogress (ME isready for commands from TA/TE,but
acallisinprogress)
5 Asleep (ME is unable to process commands from TA/TE
because it is in a low functionality state). Not Supported
6..127 All other values below 128 are reserved by ETS. Not
Supported
129 MMI is in idle state, (operator name/clock/date). This state
is a sub-state to ‘ready’ (0) and has the following
definition:
MMIinIdlestate,thatis,operator,clockanddate(isset)
shown on the display
No conversation or data call in progress
No sub-menus shown on the display
4 Only digits, clear, *, NO and # allowed in this mode, not
changing mode
130 Mobile oriented call in progress. This is a sub-state to ‘call
in progress’
131 Mobile terminated call in progress. This is a sub-state to
‘call in progress’
<mode> Description
1 Allows the CPAS to return Ericsson specific <pas> values,
such as 129, 130 and 131
To Next Page
