EasyManua.ls Logo

Sony Ericsson GM47 - AT+COPS: Operator Selection Command

Sony Ericsson GM47
310 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14. NETWORK
227
LZT 123 7263 R1A
14.13 AT+COPS Operator Selection
Forces an attempt to select and register the GSM network operator.
Description Command Possible Responses
Request operator
selection
AT+COPS=[<mode>
[,<format>
[,<oper>]]]
• +CME ERROR <err>
•OK
• ERROR
Shows the current
setting
AT+COPS? •+COPS:
<mode>[,<format>,
<oper>]
• +CME ERROR <err>
•OK
• ERROR
Show if the command
is supported
AT+COPS=? • +COPS:listofsupported
(<stat>,long
alphanumeric <oper>,
short alphanumeric
<oper>,numeric
<oper>)s
• +CME ERROR <err>
•OK
• ERROR
<mode> Description
0 Automatic (<oper> field is ignored)
1 Manual (<oper> field shall be present)
3 Set only <format> (for read command +COPS?), do not
attempt registration/de-registration (<oper> field is
ignored); this value is not applicable in read command
response
4 Manual/automatic (<oper> field shall be present); if
manual selection fails, automatic mode (<mode>=0) is
entered
<format> Description
0 Automatic (<oper> field is ignored)
1 Shortformatalphanumeric<oper>
2 Numeric <oper>
<oper> Description
string type Format determined by the <format> setting

Table of Contents