Sony Ericsson GM47 - AT*ESLN Ericsson Set Line Name

GM47/GM48 INTEGRATOR’S MANUAL
222
LZT 123 7263 R1A
14.9 AT*ESLN Ericsson Set Line Name
Sets the name tag for a selected line.
Description Command Possible Responses
Sets the line name tag
in the MS
AT*ESLN=<line>
[,<name>]
• +CME ERROR: <err>
•OK
•ERROR
Read the current
setting
AT*ESLN? •*ESLN:
<line1>,<name1><CR><LF>
*ESLN: <line2>,<name2>
• +CME ERROR: <err>
•OK
•ERROR
Test if the command is
supported and list the
possible settings
AT*ESLN=? • *ESLN: (list of supported
<line>s),<lname>
• +CME ERROR: <err>
•OK
•ERROR
<line> Description
0 Default. This means that the two lines will use the default
nametags,i.e."L1"and"L2"
1 Line 1
2 Line 2
<name> Description
String Characters for name tag
This parameter is optional when <line> is set to 0
<lname> Description
Integer Max. number of characters to use in <name> string (20)