Sony Ericsson GM47 - AT+CCFC: Call Forwarding Number and Conditions

19. SUPPLEMENTARY SERVICES
291
LZT 123 7263 R1A
19.8 AT*ELIN Ericsson Line Set
This command requests the ME to set the current line to <line>.
Note! The following commandreads its value fromthe current line and is thus
affected by the use of *ELIN:
AT+CACM - Accumulated Call Meter
19.9 AT+CCFC Call Forwarding number and Conditions
This command allows control of the call forwarding supplementary
service according to 3GPP TS 22.082 [4]. Registration, erasure,
activation, deactivation, and status query are supported. When querying
Description Command Possible Responses
Set the current line to
<line>
AT*ELIN=<line> •+CMEERROR:<err>
•OK
•ERROR
Read the current line AT*ELIN? •*ELIN:<line>
+CME ERROR: <err>
•OK
•ERROR
Test if the command is
supported
AT*ELIN=? •*ELIN:listof
supported <line>s
+CME ERROR: <err>
•OK
•ERROR
<line> Description
1 L1
2 L2
Description Syntax Possible Responses
Request
Calling
forwarding
number and
conditions
AT+CCFC=<reason>
,<mode>[,<number
>[,<type>[,<class>
[,<subaddr>
[,<satype>
[,<time>]]]]]]
• +CME ERROR <err>
• when <mode>=2 and
command successful:
+CCFC:
<status>,<class1>[,<number>,
<type>[,<subaddr>,<satype>
[,<time>]]][<CR><LF>
+CCFC:
<status>,<class2>[,<number>,<t
ype>[,<subaddr>,<satype>[,<ti
me>]]][...]]
•OK
•ERROR
Show if the
command is
supported
AT+CCFC=? • + CCFC: (list of supported
<reason>s)
• +CME ERROR <err>
•OK
•ERROR