Sony Ericsson GM47 - AT+CGPADDR: Show PDP Address Command

6. DATA - GPRS
157
LZT 123 7263 R1A
6.6 AT+CGPADDR Show PDP Address
Returns a list of PDP addresses for the specified context identifiers. The
test command returns a list of defined <cid>s.
Description Command Possible Responses
Show PDP addresses
for specified CIDs
+CGPADDR=[<cid>
[,<cid> [,…]]]
• +CGPADDR:
<cid>,<PDP_addr>
[<CR><LF>+CGPAD
DR:
<cid>,<PDP_addr>
[...]]
•OK
•ERROR
Test if the command is
supported
+CGPADDR=? • +CGPADDR: (list of
defined <cid>s)
•OK
•ERROR
<cid> Description
Integer type Parameter which specifies a particular PDP context
definition (see +CGDCONT command). If no <cid> is
specified, the addresses for all defined contexts are
returned
<PDP_address> Description
String type A string that identifies the MS in the address space
applicable to the PDP. The address may be static or
dynamic. For a static address, it will be the one set by
the +CGDCONT and +CGDSCONT commands when
the context was defined. For a dynamic address it will
be the one assigned during the last PDP context
activation that used the context definition referred to
by <cid>. <PDP_address> is omitted if none is available