Sony Ericsson GM47 - Network Operation AT Commands; AT*E2 CD: M2 M Cell Description

209
LZT 123 7263 R1A
14. Network
14.1 AT*E2CD Ericsson M2M Cell Description
Controls the presentation of an unsolicited result code E2CD: when
<n>=1, or when there is a change in one of the network cell parameters,
E2CD: <lac>,<ci>,<ta>.
Read command returns the status of result code presentation and several
values, which show the network cell parameters.
Location information <lac>, <ci> and <ta> are returned only when
<n>=1 and the ME is registered in the network. To know if the ME is
registered use the AT+CREG command. If the ME is not registered in
the cellular network an ERROR message is returned.
Description Command Possible Responses
Request network cell
description
AT*E2CD=<n> •ERROR
•OK
Read the command AT*E2CD? •*E2CD:
<n>,<lac>,<ci>,<ta>
•ERROR
Show if the command
is supported
AT*E2CD=? •*E2CD:(listof
supported <n>s)
•ERROR
<n> Description
0 Disable network location information unsolicited result
code, (default)
1 Enable network location information unsolicited result
code *E2CD: <lac>,<ci>,<ta>
<lac> Description
String type Two byte location area code in hexadecimal format
<ci> Description
string type Two byte cell ID in hexadecimal format