GM47/GM48 INTEGRATOR’S MANUAL
244
LZT 123 7263 R1A
Text Mode
Stores message (either SMS-DELIVER or SMS-SUBMIT) to memory
storage <mem2>. Memory location <index> of the stored message is
returned. By default message status will be set to ‘stored unsent’, but
parameter <stat> allows also other status values to be given. The
entering of text is done as specified in the send message command,
+CMGS. If writing fails, final result code +CMS ERROR: <err> is
returned.
Note! SMS-COMMANDs and SMS-STATUS-REPORTs cannot be stored in
text mode.
Description Command Possible Responses
Write message to
memory
AT+CMGW [=<oa/da>
[,<tooa/toda>[,<stat>]]]
<CR>
Text is entered <ctrl-Z/
ESC>
•+CMGW:<index>
• +CMS ERROR: <err>
•OK
•ERROR
Show if the command
is supported
AT+CMGW=? •OK
•ERROR
<stat> Description
0 Received unread message (new message). Not
supported
1 Received read message. Not supported
2 Stored unsent message (only applicable to SMs)
3 Stored sent message (only applicable to SMs). Not
supported
<oa> Description
String type GSM 03.40 TP-Originating-Address Value in string format;
BCD numbers (or GSM default alphabet characters) are
converted to characters of the currently selected TE
character(refercommand +CSCS). Type of addressgiven
by <tooa>
<da> Description
String type GSM 03.40 TP-Destination-Address Value in string format;
BCD numbers (or GSM default alphabet characters) are
converted to characters of the currently selected TE
character(refercommand +CSCS). Type of addressgiven
by <toda>
<tooa> Description
String type GSM 04.11 TP-Originating-Address Type-of-Address octet
in integer format (default refer <toda>)
To Next Page
Loading...
