Step
2:
Connecting
to
Your
AV
Amplifier
(Receiver)
AV amplifier (receiver) and cable requirements differ as follows, depending on the source.
To enjoy BD high quality sound, set "BD Audio Setting" to "Direct" in the "Audio Settings"
setup (page 66).
To enjoy secondary audio and interactive audio, set
"BD
Audio Setting" to "Mix" in the "Audio
Settings" setup (page 66).
To enjoy Source
7.1 channel Dolby
TrueHD
audio
Dolby Digital
Plus
DTS-HD
(DTS-
HD
High
Resolution and
DTS-
HD
Master
Audio)
LPCM
5.1 channel Dolby Digital
audio
DTS
Stereo audio -
AVamplifier
(receiver)
Dolby
TrueHD-
compatible AV
amplifier (receiver)
Dolby
Digital Plus-
compatible AV
amplifier (receiver)
DTS-
HD-compatible
AV amplifier
(receiver)
7.1
channel
LPCM-
compatible
AV
amplifier (receiver)
Dolby
Digital-
compatible AV
amplifier (receiver)
DTS-compatible AV
amplifier (receiver)
Stereo audio-
compatible
AV
amplifier (receiver)
Cable (hookup)
HDMI
cable* (page 24)
HDMI
cable (page 24),
Digital optical/coaxial
cord
(page 25),
Stereo audio cord (page 26)
•
C)
CD
at.
=
=
en
-
Q)
::s.
CD
=.
*When "BDAudio Setting"
is
set
to
"Direct"
in
the
"Audio Settings" setup, audio signals decoded
by
the AV amplifier (receiver) are output.
.~.
• The supported audio formats
of
BDsJDVDs are
specified on the back ofeach package.
• For details on audio output signals, see "Audio
Output Signals" on page 83.
u
• When you connect the player
to
your AV
amplifier (receiver) using an HDMI cable, do one
of
the following:
- Connect your AV amplifier (receiver) to your
TV using
an
HDMI cable, or
- Connect the player
to
your TV using a video
cable other than
an
HDMI cable (component
video cable or audio/video cord).
•
If
you
connect acomponent that does not conform
to
the selected audio signal, a loud noise (or
no
sound) will come from the speakers, which could
damage your ears or the speakers.
"continued
23
us
To Next Page
Loading...
