Sony BVM-L230 - Settings; Selecting the Area

26
Settings
Chapter 2 Preparations
Settings
Selecting the Area
When you turn on the monitor for the first time after
purchasing it, select the area where you intend to use this
monitor from among the options.
When the area is selected, the menu item settings suitable
for the selected area are applied.
Default value for each area
1 Turn on the monitor with the MAIN POWER switch.
The Select Area screen appears.
2 Press the UP or DOWN button of the controller to
select the area where you intend to use the monitor and
press the ENTER (Ent) button.
If you select either Latin America or Asia Except
Japan, one of the following screens appears.
If 2 Latin America is selected:
Select PAL & PAL-N or NTSC & PAL-M and press
the ENTER (Ent) button.
Color
Temp
Setup
Level
Component
Level
Color
Gamut
Emulation
1North America D65 7.5% Betacam
BVM
SMPTE-C
2Latin America
Argentina D65 0%
SMPTE/
EBU-N10
BVM EBU
PAL&PAL-N
Area
Paraguay D65 0%
SMPTE/
EBU-N10
BVM EBU
Uruguay D65 0%
SMPTE/
EBU-N10
BVM EBU
NTSC&PAL-
M Area
Other Area D65 7.5% Betacam
BVM
SMPTE-C
3Africa
Australasia
Europe
Middle-East
D65 0%
SMPTE/
EBU-N10
BVM EBU
4Asia Except
Japan
NTSC Area D65 7.5% Betacam
BVM
SMPTE-C
PAL Area D65 0%
SMPTE/
EBU-N10
BVM EBU
5Japan D93 0%
SMPTE/
EBU-N10
BVM EBU
3
3
4
5
3
1
2
ENTER button
UP/DOWN buttons
Ent button
North America B
Latin America B
Africa B
Australasia B
Europe B
Middle-East B
Asia Except Japan B
Japan B
Select Area
1 North America
2 Latin America
3 Africa
Australia/New Zealand
Europe/Russia
Middle East
4 Asia Except Japan
5 Japan
Latin America
PAL & PAL-N Area B
NTSC & PAL-M Area B
Select Area
PAL&PAL-N area
NTSC&PAL-M area