Making your own titles
To change a title you have stored
In step 3, select CUSTOM1 SET or CUSTOM2 SET, depending on which title you want
to change, then press tile SEL/PUSH EXEC dial. Turn tile SEL/PUSH EXEC dial to
select [<"], then press tile dial to delete tile title. Tile last character is erased. Enter a new
title as desired.
If you take five minutes or longer to enter characters in standby mode while a
cassette is in your camcorder, the power automatically goes off
Tile characters you have entered remain stored in memory. Set tile POWER switch to
OFF (CHG) once and then follow tile procedure fl'om step 7 again.
We recommend setting tile operation in playback or playback pause mode or removing
tile cassette so that your camcorder does not automatically turn off'while you are
entering title characters.
To erase a character
Turn the SEL/PUSH EXEC dial to select [ ÷ ], then press the dial. Tile last character is
erased.
To enter a space
Select [ Z& ? ! ], then select tile blank part.
102
To Next Page
Loading...
