Sony DCR-VX2000 - Page 103

Labeling a cassette
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
If you use a tape with cassette rllerllory, you can label a cassette. Tile label can
consist of up to 10 characters and is stored in cassette nlemory. When you insert
the labeled cassette and set the POWER switch to VCR, CAMERA, or
MEMORY, tile label is displayed for about five seconds.
Insert tile cassette you want to label.
Set tile POWER switch to VCR or CAMERA.
Press MENU to display the menu.
Turn tile SEL/PUSH EXEC dial to select [], then press the dial.
Turn tile SEL/PUSH EXEC dial to select TAPE TITLE, then press tile dial. The
tape title display appears.
Turn the SEL/PUSH EXEC dial to select the column of the desired character,
then press the dial.
Turn the SEL/PUSH EXEC dial to select the desired character, then press the
dial.
Repeat steps 6 and 7 until you finish the label.
Turn the SEL/PUSH EXEC dial to select [SET], then press the dial.
The label is stored in memot 7.
MENU
45 OMSET
CM SEARCH
I _ TAPE TITLE
, TITLE DSPL
[]'_T I TLEERASE
ITEM ERASE I
_;_ E CM SET
_ CM SEARCH
] TITLE DSPL
L_IW ]IEMERASE I
_ E; c E TAPE T'TkE
, FGHIJ 67890
PQRST [ d- ]
TAPET,TLEITAPET,T E
ABODE 12345 ABODE 12345
FGHIJ 67890 FGHIJ 87890
' , /_ [KLMNO' , S-
PQRST [ ÷ ] r_ PQRST [ e ]
UVWXY [SETI uVWXY [BET]
[MENU] END [MENU_ END
ABODE 12345 ABODE 12345
FGHIJ 67890 FGHIJ 67890
KL_O ', /- _ KL_O '. /-
PQRST [ ÷ ] PQRST [ '_ ]
UVW×y [SET] UVWXY [SET]
z& ?f z& ?_
[MENU] END [MENU] END
103