Labeling a cassette
To change the label you have made
Insert the cassette to change tile label, and operate ill the same way as you do to make a
new label.
If you set the write-protect tab of the tape to lock
You cannot label tile tape. Slide tile write protect tab to release tile write protection.
If you have superimposed titles in the cassette
When tile label is displayed, up to four titles also appear.
When the "-----" indicator has fewer than 10 spaces
Tile cassette memory is full.
Tile .... indicates tile number of characters you can select for tile label.
To erase a character
Turn tile SEL/PUSH EXEC dial to select [ <- ], then press tile dial. Tile last character is
erased.
To enter a space
Select [ Z& ? [ ], then select tile blank part.
104
To Next Page
Loading...
