Recording a still image on a tape -Tape Photo recording
You can make a tape photo recording with the self-timer. This mode is useflfl when you
want to record yourself. You can also use tile Remote Commander.
(1) Press @ (self-timer) in standby mode. Tile _ (self-timer) indicator appears on
the LCD screen or in the viewfinder.
(2) Press PHOTO deeply.
Self timer starts counting down from 10 with a beep sound. In the last two
seconds of the countdown, the beep sound gets faster, then recording starts
automatically.
To cancel self-timer recording
Press _Q) (self-timer) so that the x(_.)indicator disappears fl'om the LCD or viewfinder
screen while your camcorder is in standby mode. You cannot cancel the self-timer
recording using the Remote Commander.
Note
The self-timer recording mode is automatically canceled when:
Self timer tape photo recording is finished.
The POWER switch is set to OFF (CHG) or VCR.
32
To Next Page
Loading...
