Superimposing a title
(5) Press tile SEL/PUSH EXEC dial again to complete tile setting.
In playback, playback pause, or recording mode:
Tile "TITLE SAVE" indicator appears on the screen for five seconds and the
title is set.
In standby mode:
The "TITLE" indicator appears. When you press START/STOP to start
recording, "TITLE SAVE" appears on the screen for five seconds and the title
is set.
If you set the write-protect tab to lock
You cannot superimpose or erase the title. Slide the write-protect tab to release the write
protection.
To use a custom title
If you want to use the custom title, select r_ in step 2.
If the tape has a blank portion
You cannot superimpose a title on that portion.
If the tape has a blank portion in the middle of the recorded parts
The title may not be displayed correctly.
The titles superimposed with your camcorder
• They are displayed only on the DV M,,,|_ format video equipment with the index titler
flmction.
• The point you superimposed the title may be detected as an index signal when
searching a recording with other video equipnlent.
To not display titles
Set TITLE DSPL to OFF in the menu settings (p. 107).
98
To Next Page
Loading...
