Sony DSR-45 - Switch Check (1); Switch Check (2); Switch Check (3)

5-39
DSR-45/45P
7. SWITCH CHECK (1)
Page 9 Address E0
Bit Function When bit value = 0 When bit value = 1
0STOP (FR-183 board S408) OFF ON
1 REW (FR-183 board S404) OFF ON
2 PLAY (FR-183 board S405) OFF ON
3 REC (FR-183 board S407) OFF ON
4PAUSE (FR-183 board S409) OFF ON
5 FF (FR-183 board S406) OFF ON
6 END SERCH (FR-183 board S412) OFF ON
7 RESET (COUNTER) (FR-183 board S414) OFF ON
Using method:
1) Select page: 9, address: E0.
2) By discriminating the bit value of display data, the pressed key can be discriminated.
8. SWITCH CHECK (2)
Page 9 Address E1
Bit Function When bit value = 0 When bit value = 1
0AUDIO DUB (FR-183 board S410) OFF ON
1 INDEX (FR-183 board S413) OFF ON
2 DUP (FR-183 board S411) OFF ON
3 FINE (FR-183 board S417) OFF ON
4 UP (FR-183 board S415) OFF ON
5DOWN (FR-183 board S416) OFF ON
6
7
Using method:
1) Select page: 9, address: E1.
2) By discriminating the bit value of display data, the pressed key can be discriminated.
9. SWITCH CHECK (3)
Page 9 Address E2
Bit Function Bit value
0
AUDIO INPUT When bit value = 0 When bit value = 1
(FR-183 board S422) MANU AUTO
1, 2
COUNTER SELECT When bit value = 0, 0 When bit value = 1, 0 When bit value = 0, 1
(FR-183 board S418) TC COUNTER U-BIT
3, 4
AUDIO MONITOR When bit value = 0, 0 When bit value = 1, 0 When bit value = 0, 1
(FR-183 board S419) MIX CH1/2 CH3/4
5
CHARACTER DISPLAY (MONITOR OUT) When bit value = 0 When bit value = 1
(FR-183 board S423) OFF ON
6, 7
CHARACTER DISPLAY (LCD) When bit value = 0, 0 When bit value = 1, 0 When bit value = 0, 1
(FR-183 board S421) ON OFF BLACK BACK
Using method:
1) Select page: 9, address: E2.
2) By discriminating the bit value of display data, the state of the switches can be discriminated.