3-4
DVW-250/250P
Audio Meter LCD Discription
BANK
LOAD ............. Read in the setup data from a memory bank.
0 : factory default setup data
1 : setup data from bank 1
2 : setup data from bank 2
3 : setup data from bank 3
SAVE ............. Save the current setup data in a memory bank.
1 : Save in bank 1.
2 : Save in bank 2.
3 : Save in bank 3.
EXIT
ISR
ISR ............. Select whether to use REMOTE connector for ISR.
OFF : no ISR; use as Sony 9-pin protocal interface.
ON : use as ISR interface.
SPEED ............. Set data transmission speed in ISR mode.
19200, 9600, 4800, 2400 or 1200 bps
EXIT
TRACKING
AUTO TR ............. Select whether to carry out auto tracking.
OFF : no auto tracking
ONE : auto tracking once, when tape is loaded
ON : continual auto tracking
AUTO EQ ............. Select whether to activate the auto equalizer.
OFF : no auto equalizer
ON : activate auto equalizer
EXIT
3-1. Setup Menu
To Next Page
