6-6
DVW-250/250P
(3) Oil and grease
Be sure to use the relevant oil and grease. If the different oil or grease used,
major malfunction may cause due to the differences in viscosity and ingredients.
If the oil and grease used which mixed with dust, major malfunction may cause.
Be sure to use the following oil and grease.
Oil : 7-661-018-18
Grease (SGL-601): 7-651-000-10
Grease (SGL-801): 7-651-000-11
• A drop of oil defines as follows; About the amount will adhere to the end of a
stick (2 mm in diameter) as shown in the figure.
• Smear grease onto the surface of the park like a thin film.
• Apart from the relevant areas never use the oil and grease. If grease smeared
apart from the relevant areas, be sure to wipe using a gauze or soft cloth.
6-1. General Information for Mechanical Part Replacement
2mm diam.
Oil
To Next Page
