6-8
DVW-250/250P
3. Intermediate position between L and S cassette position:
It means that positions of two driving racks are the same place, and A portion of
the slide link parallels to the unit. (Refer to following figure.)
How to put the unit into the L cassette position, S cassette position and intermediate
position between L and S cassette positions:
Turn an idle gear as shown in the figure until the reel table assemblies shift to the
desired position and driving rack lock.
n
If a cassette tape is inserted, the reel tables can not be shifted.
Driving racks
SE-233 board
S reel table T reel table Slide linkA portion
Driving racks
S reel table
S cassette
portion
L cassette
portion
Idle gear
6-1. General Information for Mechanical Part Replacement
To Next Page
