59
Resuming the Standard Conditions
Chapter 3 Basic Adjustments and Settings
function (see page 64) is limited. With COMP MODE
set to OFF or ANGLE, frame frequencies of 8 FPS or
less are not available to minimize picture degradation.
Usage under FPS will increase noise on the picture.
To lift this limitation, change the FPS LIMITER setting
on the <OTHERS 2> page of the MAINTENANCE
menu from LIMIT to FREE.
If the setting is changed from FREE to LIMIT, COMP
MODE will be forcibly set to OFF.
3-10 Resuming the
Standard Conditions
The <OPERATOR FILE> page of the USER
(OPERATION) menu permits you to return the operation
items (those contained on pages U02 to U14 of the factory-
preset USER menu) you changed to the factory-set
statuses.
<OPERATOR FILE> page
Position the pointer to PRESET and push on the MENU
SEL/ENTER dial. The operation items return to the
statuses stored in the operator file.
For details on the operator file, see “Chapter 5 Storage
and Retrieval of User Setting Data”.
<OPERATOR FILE> U16
READ (MS CAM)
WRITE (CAM MS )
B
PRESET
FILE ID:
CAM CODE
DATE
To Next Page
Loading...
