Sony F35 - Inverting the Camera Picture; Detailed Setting of the Video Format

63
Inverting the Camera Picture / Detailed Setting of the Video Format
Chapter 3 Basic Adjustments and Settings
3-12 Inverting the
Camera Picture
The image-inversion function allows you to cancel the
image inversion phenomena that occurs when a cine-lens
converter is used.
Use the <OTHERS 1> page on the USER
(MAINTENANCE) menu to access to this function.
<OTHERS 1> page
Set IMAGE INVERT to ON to activate the image-
inversion function. The upside of the picture comes down,
swapping the right and left.
3-13 Detailed Setting of
the Video Format
You can select various video formats according to that of
the video recorder used in combination.
Available formats
1) When an SRW-1 is connected, the HKSR-102 Picture Cache Board must
be mounted in the SRW-1.
2) When an SRW-1 is connected, the HKSR-103 RGB 60P Processor Board
must be mounted in the SRW-1.
3) Output via the interface box is enabled only when two interface boxes are
connected.
<OTHERS 1> U21
FAN MODE : AUTO1
CAM BARS : OFF
HD-BAR(VF/MONI)
BAR 16:9(100%)
SD-BAR
SMPTE
IMAGE INVERT :
B
OFF
IRIS CLOSE : OFF
MONI REMOTE REC : OFF
SMEAR REDUCER : OFF
Frame rate Signal format
23.98PsF 4:2:2 YCbCr
4:4:4 RGB
S23.98PsF
1)
4:2:2 YCbCr
4:4:4 RGB
24PsF 4:2:2 YCbCr
4:4:4 RGB
S24PsF
1)
4:2:2 YCbCr
4:4:4 RGB
25PsF 4:2:2 YCbCr
4:4:4 RGB
S25PsF
1)
4:2:2 YCbCr
4:4:4 RGB
S30PsF
1)
4:2:2 YCbCr
4:4:4 RGB
29.97PsF 4:2:2 YCbCr
4:4:4 RGB
S29.97PsF
1)
4:2:2 YCbCr
4:4:4 RGB
50P 4:2:2 YCbCr
4:4:4 RGB
2) 3)
S50P
1)
4:2:2 YCbCr
4:4:4 RGB
2) 3)
S59.94P
1)
4:2:2 YCbCr
4:4:4 RGB
2) 3)
59.94I 4:2:2 YCbCr
4:4:4 RGB
50I 4:2:2 YCbCr
4:4:4 RGB
S60P
1)
4:2:2 YCbCr
4:4:4 RGB
2) 3)