Sony F35 - Page 89

89
Menu List
Chapter 4 Menu Configuration and Detailed Settings
<BATT ALARM
SET>
Setting the voltage
values to trigger
alarm indications
M10
[M06]
DC IN (24 V)
TYPE AC ADP BATT1, BATT2, AC ADP BATT1/BATT2: Batteries
AC ADP: AC adaptor
NEAR END 22.2 V 0.1 to 30.0 V Fixed to the default value
for AC ADP
END 21.6 V 0 to 29.9 V Fixed to the default value
for AC ADP
DC IN (12 V)
TYPE AC ADP BATT1, BATT2, AC ADP BATT1/BATT2: Batteries
AC ADP: AC adaptor
NEAR END 11.1 V 11.0 to 17.0 V Fixed to the default value
for AC ADP
END 10.8 V 10.5 to 14.0 V Fixed to the default value
for AC ADP
<GENLOCK>
Adjusting Genlock
with status
indications
M11
[M07]
REFERENCE INTERNAL, GENLOCK
IN
Display only
STATUS OK, NG, NO SIGNAL Display only
H PHASE 0 –511 to 511 To adjust the H phase for
genlock (With a CA-F101
mounted, “– – –” is
displayed and the setting
cannot be changed.)
<DATE/HR METER>
Setting the built-in
clock and displaying
the hour meter
M12
[M08]
DATE/TIME yyyy/mm/dd
hh : mm
HOUR METER 1H to 99999H The accumulated powered
time after reset by the
Service menu is displayed.
MAINTENANCE menu
Page title &
purpose
No. Item Default Settings Remarks