140
11 White Balance
Remark #2:
“Data Recall” only will reset current Color Temp. data
to default. For this case only Cool Color Temp. will be
reset to TV set. To reset Neutral and Warm
adjustment we need to change Color Temp. to
intended Color temp. and execute “Recall Data”
operation again.
“Data Save” is needed for every Color Temp. once
“Recall Data” is executed to save the default data.
7) To get original WB data if panel or Board is changed, please execute Data recall for each color temp.
Press
Press
Enter
Return to
original
WB data
8) AC Off and ON is needed after Recall data.(For function 6(ii)).
Short time flicker (White pattern changes 3 times) can be observed to verify the Copy Data
operation is working.
To Next Page
Loading...
