To Next PageTo Next Page
Need help?Do you have a question about the Sony HCD-VX333 and is the answer not in the manual?
General| Brand | Sony |
|---|---|
| Model | HCD-VX333 |
| Category | Car Receiver |
| Language | English |
Details power output, impedance, tuning ranges, frequency response, and signal-to-noise ratios.
Covers power requirements, dimensions, accessories, and critical component safety warnings.
Instructions for panel and key board removal/installation and related notes.
Overview of buttons on the main unit and their functions.
Lists remote control buttons and their corresponding functions with page references.
Step-by-step guide to set the clock time using the remote control.
General notes on the order of disassembly for various unit sections.
Detailed steps and diagrams for removing the top case assembly.
Procedure for removing the CD door mechanism.
Steps to disassemble the front panel section, including connectors and boards.
Instructions for removing the tape mechanism deck assembly.
Steps for removing the panel board, including knob and connector.
Procedure for removing the key board, noting connection to Service Note.
Steps for removing various rear and side boards.
Instructions for removing the main and power amplifier boards.
Steps to disassemble the base unit, including optical pick-up and BD board.
Procedures for removing the driver, motor, and address sensor boards.
Clears all data in RAM to initial conditions for customer return.
Moves pickup to a durable position for shipping after repair.
Resets set while keeping preset data, similar to power cycle.
Allows free movement of CD sled motor for cleaning pickup.
Changes AM tuner step between 9 kHz and 10 kHz.
Checks software version, FL tube, LEDs, keyboard, headphone, volume.
Displays MC and GC microprocessor version numbers or model name/destination.
Checks CD and tape deck operations; stops on error, continues on success.
Shows display states for no error or error occurrence in CD section aging.
Explains error codes for mechanism and no-disc conditions during aging.
Outputs color-bar signal for video CD signal check.
Checks CD servo functions, allows tracking servo/sled servo toggle.
Procedures for FM tuned level, S-curve, null, and RF level adjustments.
Checks oscilloscope waveform symmetry and peak-to-peak level.
Adjusts voltage for FM tuned level indication.
Confirms clear RF signal waveform and correct level.
Procedures for frequency and E-F balance adjustments in the video CD section.
Adjusts CT503 for correct video CD frequency reading.
Checks waveform level B and A, and specified level A x 100.
Shows the physical layout of all circuit boards within the unit.
Illustrates signal flow and component connections for the tuner and CD sections.
Includes printed wiring and schematic diagrams for the main board.
Provides printed wiring and schematic diagrams for the BD board.
Includes printed wiring and schematic diagrams for the power amp board.
Printed wiring and schematic diagrams for the panel board.
Printed wiring and schematic diagrams for the key board.
Printed wiring and schematic diagrams for the video CD board.
Printed wiring and schematic diagrams for the driver section.
Printed wiring and schematic diagrams for the trans section.
Details pin functions for key ICs like IC401, IC701, IC502, etc.
Visual representations of internal logic and connections for key ICs.
Diagram showing breakdown of the main unit's components and their part numbers.
Exploded view of the front panel assembly, showing buttons, knobs, and covers.
Diagram illustrating the main board and associated power/trans boards with part numbers.
Exploded view detailing the CD mechanism deck components, including motors and sensors.
Lists components for the address sensor board, including ICs, resistors, capacitors, and connectors.
Lists components for the BD board, including ICs, transistors, resistors, and capacitors.
Lists components for the driver board, including transistors and connectors.
Lists components for the key board, including switches and resistors.
Comprehensive list of components for the main board, including capacitors, resistors, and diodes.
Lists components for the panel board, including connectors, diodes, and capacitors.
Lists components for the power amplifier board, including transistors, ICs, and capacitors.
Lists components for the sub trans board, including fuses, transistors, and capacitors.
Lists components for the trans board, including transformer, fuses, and transistors.
Lists components for the video CD board, including capacitors, diodes, and connectors.
Records the version number, date, and description of revisions made to the manual.
