Sony HCD-VX88 - Page 10

10
4 two screws
(BVTP 3 × 16)
6 POWER AMP boar
d
5 three screws
(BVTP 3 × 8)
8 heat sink
7 two screws
(BVTP 3 × 8)
3 MAIN board
2 two connectors
(CN901, 902)
1 two screws
(BVTP 3 × 8)
5 ground point screw
(PTT 2 × 4)
6 HEAD (A) board
plunger (PM1001)
3 five claws
1 Remove two solders of plunger (PM1001)
leads.
2 Remove four solders of
capstan/reel motor (M901) lead.
4 LEAF SW board
1 Remove two solders of
plunger (PM1002) leads.
plunger (PM1002)
7 ground point screw
(PTT 2 × 4)
8 HEAD (B) board
MAIN/POWER AMP BOARDS
LEAF SW/HEAD (A)/HEAD (B) BOARDS