32
Insert memory cards each in both slots A and B so the camcorder switches memory card A (or
B) just before the remaining space on the other one runs out, and continues recording on the
next memory card automatically.
Make the following setting before recording.
Set (REC/OUT SET) t [REC SET] t [SIMUL/RELAY REC] t [RELAY REC].
b Notes
• Do not eject the memory card that is currently being used for recording. When replacing a memory card
while recording, replace only the one in the slot whose access lamp is off.
• When recording, you cannot switch the slot even if you press the memory card slot A or slot B button.
• When the remaining recording time of the memory card being used is less than 1 minute and the other slot
has a recordable memory card inserted, [ ] or [ ] appears on the camcorder screen.
The indicator turns off when the memory card is switched.
• If you start recording on a memory card with the remaining recording time of less than 1 minute, the
camcorder may not be able to relay-record. To relay-record without failing, make sure that the memory
card has more than 1 minute when you start recording.
• Seamless playback of relay-recorded movies with this camcorder is not possible.
• You can combine relay-recorded movies using application software (p. 18).
• The maximum recording time using relay recording is about 13 hours. Recording stops automatically
when the maximum recording time elapses.
Continuous recording on the memory cards (Relay Rec)
REC start
Low remaining
capacity
Exchange the recordable memory card
Low remaining capacity
REC end
REC: Recording
Recording (Continued)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
