39
Recording
Adjusting the brightness
You can adjust the image brightness by
adjusting the iris, gain or shutter speed, or
by adjusting the light volume with the ND
filter switch B.
b Note
• When you set the AUTO/MANUAL switch H
to AUTO, the iris, gain, shutter speed, and white
balance are adjusted automatically. You cannot
adjust them manually.
1 Set the AUTO/MANUAL switch H
to MANUAL.
2 Press the IRIS button D.
The next to the iris value disappears.
3 Turn the iris ring A to adjust the
value.
The volume of the light increases the
more that you open the aperture
(decreasing F value). The volume of the
light decreases the more that you close
the aperture (increasing F value).
To temporarily adjust the iris
automatically
If the IRIS PUSH AUTO function has been
assigned to an ASSIGN button (p. 54),
press and hold the button to adjust the iris
automatically. This function is assigned to
the ASSIGN3 button C by factory default.
To adjust automatically
Press the IRIS button D.
The iris value disappears or appears
next to the iris value.
Adjusting the iris
Iris value
Continued ,
To Next Page
Loading...
Need help?
General
Weight and Dimensions
