48
1 Connect the Multi Interface Shoe
compatible microphone (sold
separately) to the Multi Interface
Shoe.
2 Set the CH1 (INT MIC/EXT/MI
SHOE) switch E and CH2 (INT
MIC/EXT/MI SHOE) switch F to
MI SHOE.
When the CH1 and CH2 switches are both
set to INT MIC, both the left and right
channels are adjusted by the CH1 switch/
dial.
1 Set the AUTO/MAN switch for the
channel that you want to adjust
(CH1 G or CH2 H) to MAN.
appears on the screen.
2 Turn the AUDIO LEVEL dial (CH1
I or CH2 J) to adjust the audio
level.
Use headphones or an audio level meter to
check that the audio level is appropriate.
To restore automatic adjustment
Set the AUTO/MAN switch for the
adjusted channel (CH1 G or CH2 H)
after manual adjustment to AUTO.
When you select CH1 or CH2, the input
audio for the corresponding channel is
output to the headphones.
When you select MIX, the input audio for
both channels is output to the headphones.
You can select [STEREO] or [MIX
MONO] in [HEADPHONE OUT] when
MIX is selected (p. 97).
Setting the audio recording
level
Setting the headphone sound
Audio setup (Continued)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
