36
You can adjust the enlarged display
position with the multi-selector. Press the
multi-selector to set the enlarged display
position back to the center.
b Note
• Even though the image appears enlarged on the
LCD screen, the recorded image is not enlarged.
z Tip
• You can change the magnification ratio with
[FOCUS MAG RATIO] (p. 100).
Slide the FOCUS switch B to INFINITY
and hold it there.
is displayed.
If you release the button, the setting returns
to manual focusing.
This function enables you to shoot a distant
subject even when the focus is set on a
close subject.
b Note
• Infinite focus is available only during manual
focus adjustment. It is not available during
automatic focus adjustment.
The camcorder detects faces and focuses on
one of them (The default setting is [OFF]).
[FACE DETECTION] is available only
with automatic focus.
1 Press the MENU button D.
2 Select (CAMERA SET) t
[FACE DETECTION] t [ON].
When the faces are detected, frames
appear on the LCD screen.
3 Move the selection cursor
(orange colored frame) to select
the priority face.
The frame on the priority face changes
to a double frame.
To cancel the priority face
Move the selection cursor to the priority
face, then press the SET button.
b Notes
• Faces may not be detected depending on the
recording environment, the condition of the
subject or the settings.
Focusing on a distant subject
(Infinite focus)
Enlarged display position
Focusing on a detected face
(Face detection)
Selection cursor (orange colored frame)
Priority face frame (double frame)
Adjusting the focus (Continued)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
