40
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000/32S3000/40S3000/46S3000
KDL-32S3000 ONLY
1. Install H4-Bd BEFORE Installing the
speakers/baffles.
2. Apply LCD Tape on SIDE of the magnet
on Rt. Speaker to hold the H4 Cables.
3. MAKE SURE there is slack in the cable between
the H4 Connector and LCD Tape.
Tension on the cable will cause the Connector
to lift or break.
×
OPERATION PROCESS
1
2
3
H4 BOARD