Sony KV-13FM13 - Setting up the TV Automatically

Using the Remote Control and Basic Functions
13
Setting Up the TV Automatically
After you have finished connecting your TV, you can perform
Auto Program to set up your channels.
1 Press to turn on the TV. The Initial Setup screen appears.
2 Press on the remote control or in the TV front panel to perform
Auto Program.
To perform Auto Program again
1 Press .
2 Press g to highlight Setup ( ).
3 Press f to highlight Options. Press g or to select.
4 Press f to select Cable. Press g or to select.
5 Press F or to select ON or OFF according to how you connected
your TV. Press G or .
6 Press f to highlight Auto Program. Press g or to search for
channels.
✍ The Initial Setup screen appears each time you turn on the TV until you
perform Auto Program.
Auto Program
EXIT
[CH+]
[CH-]
First please connect
cable/antenna
CH
MENU
F