Sony MHC-V42D - Page 27

27
MHC-V42D
MOTHERBOARD Board Mount Amplier Diagnosis Flow (1/3) 1. “PROTECT3” is displayed after turning the power on
“PROTECT3” is displayed on the screen display panel after turning the power on.
“PROTECT3” is not displayed, when removing the speaker connector (CN2021) and
turning the power on. Check that IC2002 pin 27, 32, 35 and 39 is short to GND.
Check and replace the speaker.
Exchange IC2002.
MOTHERBOARD board damaged. Exchange the MOTHERBOARD mounted pc board.
Yes No No
Yes
Yes
SYSSET
2019/03/0500:47:46(GMT+09:00)