Sony MHC-V42D - Page 7

MHC-V42D
7
HOW TO OPEN THE TRAY WHEN POWER SWITCH TURN OFF
Note 1: After the side panel and top panel are removed, this work is done.
Note 2: Please prepare the thin wire (clip etc. processed to the length of 5 cm or more).
2 Insert the clip etc.
3
1 Remove the side panel (L), (R), top panel section.
(Illustration of disassembly is omitted.)
hole
DVD mechanism
deck
Insert the clip etc. processed to the
length of 5 cm or more in the hole
on the side of the CDM and push.
Note: Push after it inserts it
in this hole well.
- Left view -
- Top view -
tray
5 cm or more
SYSSET
2019/03/0500:47:46(GMT+09:00)