GB
12
Preparing the camera
A Image sensor position mark
B Battery cover (15)
C Memory card cover (19)
D Tripod receptacle
• Use a tripod with a screw length
of less than 5.5 mm (7/32 inch).
You will be unable to firmly
secure the camera to tripods
having screws longer than 5.5
mm (7/32 inch), and may damage
the camera.
E Battery compartment (15)
F Connection plate cover
For using the AC-PW20 AC
Adaptor (sold separately)
G Access lamp (20)
H Memory card insertion slot (19)
x
Flash
A Screw
B Flash*
C Connector*
* Do not touch this part directly.
If it is dirty, wipe it off with a soft
clean cloth.
To Next Page
Loading...
