GB
41
Using the recording functions
Selecting the flash mode
The flash range
The range of the supplied flash depends on the ISO sensitivity and aperture
value.
1
Attach the flash and raise it (page 20).
2
Press [Menu].
[Menu]
3
Use the control wheel to select [Camera] t [Flash Mode],
and press the center.
4
Turn the control wheel to select the desired mode, and
press the center.
(Flash Off): Does not fire even if the flash is raised.
(Autoflash): Fires if it is dark or against light.
(Fill-flash): Fires every time you trigger the shutter.
(Slow Sync.): Fires every time you trigger the shutter. Slow sync
shooting allows you to shoot a clear image of both the subject and the
background.
(Rear Sync.): Fires right before the exposure is completed every time
you trigger the shutter. A trailing image of the movement of the subject is
captured to make more natural image.
• The selectable items of the flash mode depends on the shooting mode
(page 58).
F2.8 F3.5 F5.6
ISO200 1 – 3.5 m (3.3 – 11.6
feet)
1 – 2.8 m (3.3 – 9.2
feet)
1 – 1.8 m (3.3 – 5.9
feet)
ISO1600 2.8 – 10 m (9.2 – 32
feet)
2.3 – 8 m (7.5 – 26.2
feet)
1.4 – 5 m (4.6 – 16
feet)
To Next Page
Loading...
