Sony PRS-950 - Charging the Reader

Getting Started
23
Table of Contents Index
Charging the Reader
Charge your Reader by connecting to an AC outlet
using the supplied AC adapter (PRSA-AC1).
The time to completely charge a depleted battery is
about 3 hours.
1 Connect one end of the USB cable to the micro
USB connector of the Reader, and the other
end to the AC adapter.
2 Connect to an AC outlet.
The indicator on the Reader lights up in red while
charging, and goes off when charging is completed.
Charge/Busy indicator
Micro USB connector
USB cable
AC adapter
(PRSA-AC1)
AC outlet
Battery status indicator
(
r
xx)