HCD-SHAKE99/HCDSHAKE100
79
Pin No. Pin Name I/O Description
55 RD3 I/O Two-way data bus with the SD-RAM
56 DVDD12 - Power supply terminal (+1.2V)
57 RD4 I/O Two-way data bus with the SD-RAM
58 RD5 I/O Two-way data bus with the SD-RAM
59 RD6 I/O Two-way data bus with the SD-RAM
60 RD7 I/O Two-way data bus with the SD-RAM
61 DQM0 O Data mask signal output to the SD-RAM
62 RD15 I/O Two-way data bus with the SD-RAM
63 RD14 I/O Two-way data bus with the SD-RAM
64 RD13 I/O Two-way data bus with the SD-RAM
65 RD12 I/O Two-way data bus with the SD-RAM
66 RD11 I/O Two-way data bus with the SD-RAM
67 RD10 I/O Two-way data bus with the SD-RAM
68 RD9 I/O Two-way data bus with the SD-RAM
69 RD8 I/O Two-way data bus with the SD-RAM
70 DQM1 O Data mask signal output to the SD-RAM
71 DVDD33 - Power supply terminal (+3.3V)
72 RCLK O Clock signal output to the SD-RAM
73 RA11 O Address signal output to the SD-RAM
74 RA9 O Address signal output to the SD-RAM
75 RA8 O Address signal output to the SD-RAM
76 RA7 O Address signal output to the SD-RAM
77 RA6 O Address signal output to the SD-RAM
78 RA5 O Address signal output to the SD-RAM
79 RA4 O Address signal output to the SD-RAM
80 RWE# O Write enable signal output to the SD-RAM
81 DVSS12 - Ground terminal
82 CAS# O Column address strobe signal output to the SD-RAM
83 RAS# O Row address strobe signal output to the SD-RAM
84 DVDD33 - Power supply terminal (+3.3V)
85 BA0 O Bank address signal output to the SD-RAM
86 BA1 O Bank address signal output to the SD-RAM
87 DVDD12 - Power supply terminal (+1.2V)
88 RA10 O Address signal output to the SD-RAM
89 RA0 O Address signal output to the SD-RAM
90 RA1 O Address signal output to the SD-RAM
91 RA2 O Address signal output to the SD-RAM
92 RA3 O Address signal output to the SD-RAM
93 SPDIF - Not used
94 XMAMUTE - Not used
95 NC - Not used
96 DACVDDC - Power supply terminal (+3.3V)
97 VREF I Band gap reference voltage terminal
98 FS I Full scale adjustment terminal
99 DACVSSC - Ground terminal
100 CVBS O Composite video signal output terminal Not used
101 DACVDDB - Power supply terminal (+3.3V)
102 SY/Y/G O Component video (Y) signal output terminal Not used
103 SC/CB/B O Component video (Pb/Cb) signal output terminal Not used
104 CR/R O Component video (Pr/Cr) signal output terminal Not used
105 AADVSS - Ground terminal
106 ADIN I Audio data input from the A/D converter (for USB)
107 NC - Not used
108 NC - Not used
109 AADVDD - Power supply terminal (+3.3V)
110 ADACVSS2 - Ground terminal
Ver. 1.1
To Next Page
Loading...
