68
Function Setting Menu
Chapter 3 Menu
Function Switch
Aspect Marker-Line Sets whether or not to display the line of the aspect marker ([Off] or On).
Notes
• The line of the aspect marker is not displayed in the following cases:
– When the input signal has no sync signal
– When the internal signal is displayed
– When the HDMI/DisplayPort computer signal is input
– When H Delay/V Delay is set to On
– When Side by Side, Wipe, Butterfly or Blending is set to On
– When Pixel Zoom is set to on
• The line of the aspect marker may be displayed in an incorrect position when External Sync
is On.
Aspect Blanking-Half Sets whether or not to set the Aspect Blanking (the blanking outside the area of the aspect
marker) to half blanking ([Off] or On).
Notes
• The Aspect Blanking is not set to half blanking in the following cases:
– When the input signal has no sync signal
– When the internal signal is displayed
– When the HDMI/DisplayPort computer signal is input
– When H Delay/V Delay is set to On
– When Side by Side, Wipe, Butterfly or Blending is set to On
– When Pixel Zoom is set to on
• The Aspect Blanking may be displayed in an incorrect position when External Sync is On.
Aspect Blanking-Black Sets whether or not to set the blanking level of the Aspect Blanking (the blanking outside the
area of the aspect marker) to 0% black level ([Off] or On).
Notes
• The Aspect Blanking is not set to 0% black level in the following cases:
– When the input signal has no sync signal
– When the internal signal is displayed
– When the HDMI/DisplayPort computer signal is input
– When H Delay/V Delay is set to On
– When Side by Side, Wipe, Butterfly or Blending is set to On
– When Pixel Zoom is set to on
• The Aspect Blanking may be displayed in an incorrect position when External Sync is On.
Side by Side Sets whether or not to display in the side by side display ([Off] or On).
Note
The side by side display is not set in the following cases:
• When the internal signal is displayed
• When Pixel Zoom is set to on
Wipe Sets whether or not to display in the wipe display ([Off] or On).
Note
The wipe display is not set in the following cases:
• When the internal signal is displayed
• When Pixel Zoom is set to on
Butterfly Sets whether or not to display in the butterfly display ([Off] or On).
Note
The butterfly display is not set in the following cases:
• When the internal signal is displayed
• When Pixel Zoom is set to on
Blending Sets whether or not to display in the blending display ([Off] or On).
Note
The blending display is not set in the following cases:
• When the internal signal is displayed
• When Pixel Zoom is set to on
Menu Function and operation ([ ]: factory setting)
To Next Page
