17
Connections
Connecting a TV, VCR, Cable/Antenna, and Satellite Receiver
using Composite Video (VIDEO/AUDIO L(MONO), R)
1 Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2
Connect the single input jack of the splitter (not supplied) to your incoming cable/antenna
(optional connection to view local channels or broadcast).
3 Using coaxial cables (not supplied), connect the two output jacks of the splitter
(not supplied) to:
a) the IN jack on your satellite receiver
b) the VHF/UHF jack on the TV
4 Using a coaxial cable (not supplied), connect the OUT jack on your satellite receiver to the
VHF/UHF IN on your VCR.
5 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
the AUDIO/VIDEO IN on your TV.
6 Using audio/video cables (not supplied), connect the AUDIO/VIDEO OUT on your
satellite receiver to the AUDIO/VIDEO IN on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏
Program your Sony remote control to operate your VCR or satellite receiver (
see page 5
).
❏ To activate your remote, press (FUNCTION button) to operate your VCR or
(FUNCTION button) to operate your satellite receiver.
❏ Press repeatedly to switch between VCR input (VIDEO input), VHF/UHF
(local channels or unscrambled), or your cable box (cable system or scrambled channels).
VIDEO
LINE
IN
LINE
OUT
AUDIO L AUDIO R
1
3
4
AUDIO OUT
(VAR/FIX)
VIDEO
L
(MONO)
R
L
R
(MONO)
S VIDEO
Y
P B
P
R
L
R
L
R
L
R
Y
B
P
P
R
VIDEO 1
VIDEO 1
VIDEO 2
VIDEO 2
Satellite receiver
1
2
Satellite antenna
cable
VCR
4
5
6
3b
3a
Splitter
From
cable or
antenna
Rear of TV
Video (yellow)
Audio R (red)
Audio L (white)
Optional
For Viewing
For Recording
For Playback
For Viewing
To Next Page
Loading...
