Only snow and noise
appear on the screen
Cannot receive upper
channels (UHF) when
using an antenna
Cannot receive any
channels when using
cable
Cannot gain enough
volume when using a
cable box
TV is fixed to one
channel
WhatiL_d _e
i
• CABLE may not be set correctly
in the SET UP menu.
• Antenna/cable connections may
not be correct.
• TV may be set to AUX mode.
• CABLE setting may not be correct
in the SET UP menu.
• CABLE setting may not be set
correctly in the SET UP menu.
• Volume may not be adjusted on
your cable box.
• CHANNEL FIX settings may not
be correct.
• Ensure that you have selected the
correct CABLE mode in the
SET UP menu. (see page 26)
• Press ANT on your remote
control to change the input mode.
(see page 16)
• Ensure that CABLE is set to OFF
in the SET UP menu. (see page 26)
• Use AUTO PROGRAM to add
receivable channels that are not
presently in TV memory. (see
page 26)
• Ensure that CABLE is set to ON
in the SET UP menu. (see page 26)
• Use AUTO PROGRAM to add
receivable channels that are not
presently in TV memory. (see
page 26)
• Press TV (FUNCTION) and
adjust the TV's volume.
• Check your CHANNEL FIX
settings. (see page 26)
If, after reading these operating instructions you have additional quest ons re a ed to the use of your Sony
television, please catl our Direct Response Center at 1-800-222-SONY (7669). (U.S residents only)
Specifications
Supplied accessories
Remote control RM-Y165 (1)
(KV-32S40, 32V40, 35S40 only)
Remote control RM-Y167 ( 1)
(KV-32S45, 32S65, 32V65, 35S45, 35S65,
35V65 only)
Batteries size AA (R6) (2)
Optional accessories
Connecting cables
VMC-810S/820S, VMC-720M,
YC-15V/30V, RK-74A
TV Stand SU-32A3, SU-35A3
U/V mixer EAC-66
34
To Next Page