Troubleshooting
Consult the table below; it suggests solutions to specific problems.
Cannot operate single tuner PIP
(KV-32S45, 35S45)
A red light keeps flashing on the
TV for more than a few seconds
• VCR may not be connected to your TV properly.
• VCR may not be turned on.
• The remote control may not be programmed to
operate the VCR.
• Your TV may need service.
• Ensure that you have set your VCR correctly. (see page 7)
• Program your remote control to operate the VCR.
(see page 30)
• Call your local Sony service center.
TV makes a noise when turned
on
Screen is not lit and there is no
sound
Poor or no picture {screen lit),
good sound
Good picture, no sound
• This is a normal function of your TV.
• Power cord may not be plugged in.
• Batteries may nut have been placed with the correct
polarity.
• TV/VIDEO setting may be incorrect.
VIDEO menu settings may not be adjusted correctly.
Antenna/cable connections may be faulty.
VIDEO LABEL inputs may be set to WEB. {This label
darkens the screen for ideal WebTV viewing)
• Sound may be set to MUTING.
• Your TV i'nay he set to SAP.
• Speaker may not be set correctly.
• Press TV/VIDEO until you receive a channel.
• Readjust your VIDEO menu settings.(see page 22)
• Check your VIDEO LABEL settings. (see page 281
i° Press MUTE.
• Check the MTS setting in the AUDIO menu. (see page 23)
• Check your SPEAKER settings. (see page 23)
No color • Color settings may not be adjusted correctly. Adjust the COLOR settings in the VIDEO menu.
(see page 22)
33
To Next Page
Loading...
