Using Your New TV
Setting up the TV automatically
The Easy Setup Guide allows you to set the
on-screen language and set all receivable
channels in one step.
The Easy Setup Guide feature does not apply for
installations that use a cable boxfor all channel
selection.
To set up the TV manually, refer to "Using the
SET UP menu" on page 26.
Tips "_"
• Perfvrmthisfunctionduringth_day, withtheantenna
and/orcableproperlyconnected,toensurethatallavailable
channelswillbebroadcastingandreceivable.
• TheTVmustbesettotheTVinputtoexecuteAUTO
PROGRAM,PressTV/VIDEOuntilachannel
numberappears.
• If your cableorantenna is connected toAUX, press
ANT untilAUX appearsnexttothe channelnumber.
(KV-32S65, 32V65, 35S65, 35V65 only)
14
Using the buttons on the front of the TV:
s_uPW;_lOeO -vogue. -CHaNNB.. _OWER
o 0 IZIZIIZEI-G
For KV-32V65, 35V65, the control buttons are
located on the top of the TV.
1 Press POWER to turn on the TV.
The Easy Setup Guide screen appears.
ENGLISH : [CH+]
POWER ESPANOL : I[CH-]]
FRAN_AIS : VOL+
AUTO SET UP: VOL-
DEMO : [W/VIDEO]
First please connect
Press ISET UPI to exit
cable/antenna.
2 Press CH + to select ENGLISH screens,
CH - to select ESPANOL screens
or VOL + to select FRAN_AIS screens.
-CHANNEL+
3 Press VOL - to continue or TV/VIDEO for
a DEMO of functions and menus.
-- VOLUME +
AUTO PROGRAM
AUTO PROGRAM appears and the TV
starts scanning and presetting channels
automatically. If the TV receives cable TV
channels, CABLE is set ON automatically.
To perform AUTO SET UP again
Press the SET UP button on the TV and follow
steps 2-3.
Notes
• When you perform AUTO PROGRAM,
your CHANNEL FIX, CHANNEL BLOCK,
and ON/OFF TIMER settings will be
erased.
To reset your TV to factory settings, turn
the TV on. Then, while pressing the RESET
button on your remote control, press the
POWER key on your TV. The TV will turn
itself off, then back on.
To Next Page