Using Your Menus (continued)
Using the SET UP [_ menu
SET UP
CHANNEL SET UP
CHANNEL BLOCK
FAVORITE CHANNEL
VIDEO LABEL
CAPTION VISION: _ 1
LANGUAGE: ENGLISH
TILT CORRECTION: 0
_MENU
Move_ SeleCt_ Exit_
For detailed information on using the remote
control to modify menu settings, refer to
"Learning menu selection" on page 20.
To select the SET UP _ menu:
Display _ Highlight _=_11, Select
.- @ ®
5
Notes
• Tile FAVORITE CHANNEL feature is not
available for the AU× input.
• Your remote control can be programmed to
operate your cable box. (see page 32)
• After setting CABLE, you will need to run
AUTO PROGRAM.
• ON/OFF TIMER and CHANNEL BLOCK
settings will be erased when CHANNEL
FIX is set.
26
CHANNEL
SET UP
Basic set up
options for
viewing
With the CHANNEL SET UP menu open: CHANNELsEnrUP
Press • or _. to access a feature, then press _. _CABLE:ON
CHANNER_ SKIp/ADD
CHANNEL FIX: OFF
CABLE: Select ON it your TV is connected to a cable AUTOP O_3RAM
system. CHANNEL CAPTION
_MEt_U
CHANNEL FIX: Prass _, or S to sst the TV's input to one _ve_ SeleCtC}_Exit_
of the following options:
2-6: When a cable box is connected to the VHFJUHF input. Press DBS]CABLE
(FUNCTION) and then CH +/- to change channels through your cable box.
AUX 2-6: When a cable box is connected to AUX and a cable or antenna is
connected to VHF/UHF. You can alternate between the two inputs by pressing
ANT on the remote control. (KV-32S65, 32V65, 35S65, 35V65 only)
VIDEO 1: When you have connected video equipment (e.g. AN receiver) and
you want the TV input fixed to it. You will be able to alternate between video
sources using the AN receiver.
OFF: When you want to turn CHANNEL FIX off.
AUTO PROGRAM: Instructs the TV to program all receivable channels.
CHANNEL SKIP/ADD: With the CHANNEL SKIP/ADD
window open:
1 Select the desired channel.
2 Press _ to SKIP or ADD (only one option will
be available).
CHANNEL CAPTION: Label up to 12 channels with their
call letters (up to four letters).
With the CHANNEL CAPTION menu open:
1 Press _ and then 4, or _. to access the desired
channel, and press (_D again.
2 Press • or • to display the first letter or number
of the caption and press CD to select it.
3 Press _ to activate. To erase a caption,
press RESET.
I CHANNEL SKIP/ADD 33!
SKIP
)ADD
_MENU
Use(0-9] or [CH */-1
to seJ_,_tthe ehaane_ [
CHANNEL CAPTION 1
I*CHANNEL 33
CAPTION ....
_MENL_
To Next Page