Sony Trinitron KV-35V35 - Page 12

SE at RE PT Te ED
: Step 2: Installing the Installing the glass door
glass door and —
1 Check that the projection of the screw
through the hinge allows for proper
installation of the hinge to the glass door,
and then insert the bottom hinge @ into
the hole located at the bottom, right side
of cabinet.
Check projection of this
a area of screw
MB KV-32TW25/35V75 only
©
Follow these instructions to install the glass door and
adjust the shelf.
— - 1)
a
2 Attach the top hinge @ to the right side of
the glass door, tighten the screws snugly,
but do not overtighten. Attach the plate
pad @ to the left side and push the plate ©
over the plate pad.
; Oc
a OC
x A
\S
vik
Push here to close.
To open, push again.
Parts List
@ Bottom hinge 1
3 Push the top, glass door hinge into the top,
@ Top hinge ih right bushing and gently slide the glass
door into the bottom hinge. Adjust the
© Screw4x4 OD 4 glass door until! level, and tighten the hinge
screws. -
© Plate pad os 1
@ Plate eae |
Note
* The glass door is made of tempered glass. Although it is more
shock-resistant than ordinary glass, tempered glass may
12 | Getting Started shatter if it is dropped or receives a sudden shock.